kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,360
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
Kindly open a ticket with support regarding this issue and we'll see how best to get to the bottom on it. Thank you
-
Thank you for the update.
-
Some of these functions could very well be only suited for the training and cockpit editions. I recommend dropping an email to our support department for clarification. The PRO edition although having the capability and flexibility for the use of …
-
Are you able to replicate the issue? This however does seem odd, as it sounds like something may have disrupted the sim connect communication between aircraft and simulator.
-
Could you provide some examples or the approaches in question, or is this regarding ALL ILS approaches that you have conducted?
-
Hello, Regarding the power levers it could very well be the incorrect axii being assigned and or incorrect input device assignment, verify via the P3D input device binding process or via FSUIPC if you use it.
-
Looking at the image posted it is somewhat difficult to determine much of anything. What I can suggest for a detailed break down of FMS usability Youtuber FLTSIM481 has exhibited a good demonstration of the UNS 1. I could attempt to explain what m…
-
OK sounds good thanks for the heads up
-
Unfortunately, we have not developed a stand-alone FMS interface, so at this time no.
-
Hello, Thank you for the extensive research on this. We are aware of some inconsistencies that do have the probability of causing a CTD, which is going to be looked at in depth. We have addressed a few issues in the past but will certainly add …
-
No worries
-
Reload: Navigate back to VEHICLE and re-select the aircraft variant that you have chosen to fly. And yes you are correct in that this can be done prior to loading the SIM.
-
@Ganlhi The info provided by @Jax_in_BC is correct. The information that you read regarding the CPAN not working as intended is based on Prepar3D v5.x Since you are using P3D v4.x you should have not have any issues and can simply use the CPA…
-
Thank you for the files, unfortunately the files are unusable as they appear to be shortcut.lnk and not the actual files.
-
Create a zip file with all the files mentioned. And attach the file to the post Cheers
-
Hello, Thank you for your feedback regarding this issue. * What version of the Majestic Q400 are you using (Pilot/PRO/Cockpit)? * What version of P3D are you using? * Is this being on observed on any planned/flown route, or this a spec…
-
The failure of the landing gear to retract more than like is related to a failure to remove the gear pins prior to closing the main pax door and starting the engines. The next time you save a scenario forward me the files which can be acquired …
-
Having done some testing to verify your issue, I was not able to replicate the problem. If it happens again I would start by stopping and restarting the couatl for gsx and see if that rectifiers the issue. Seeing your post that it appears to be…
-
Responded to the thread regarding the sound issue
-
Hello, I am going to assume that you are using P3D v4.5. If this is the SIM in use then the issue has been corrected as it was reported in another thread. The fix will be distributed in an upcoming patch. Thanks for your assistance.
-
Unable to offer support with the sound pack as it is developed by Parallel 42. Are you experiencing the same issue with the default sounds? The visual extension has no link to sounds on the aircraft, if you suspect that either is causing an is…
-
@CPTJAKEOLIVER said: With the completion of the cockpit edition will the dash 8 300 for P3D become a primary focus The TRAINING Edition is to be released next, and then a deeper focus on the Q300 will continue. We will make announcements…
-
No worries, it can easily throw one off as it heard some of the time and not others. Cheers
-
Good info gents, be sure to drop a line with this query to our support department, and I will add it to our items for review in our bug tracker.
-
DH USED FOR MINIMUMS (CAT II) CONDITIONS EGPWS 2,500 ................. "TWENTY-FIVE HUNDRED" 1,000 ................. "ONE THOUSAND" 100 above DH ..... "PLUS HUNDRED" DH ...................... "MINIMUMS" 50 ....................... "FIFTY" 40 .…
-
With the cockpit edition you should be able to use the efis client and position the screens specifically to your cutouts, if you are looking to minimize the costs of 5 tablets
-
Hi Guenther, We have not gotten many reports of this nature, but after doing some checking it appears that we also do get "signed out" occasionally, very likely from the expiration of the cookie, and or if performing a system cleaning of files. …
-
@ChuckO , We found the issue regarding your report and will provide a fix in an upcoming patch...thx
-
@ChuckO Good to hear you are enjoying the visual package. Thank you for the heads up regarding the artifact issue in version 4.5. Are you able to replicate it, and if so under what conditions (is it always at dusk)? Cheers
-
@SK331 said: For us non hardware cockpit flyers, is there a chance of getting FMS RAIM simulations, single cue simulations and surfaces slopes support in the pro version? 295 eur is a bit excessive just for those features without use of the rest.…