Jax_in_BC
About
- Username
- Jax_in_BC
- Joined
- Visits
- 170
- Last Active
- Roles
- Member
Comments
-
Hello airwolf66, You are using the wrong variable for the right brake pedal. Try: FlightControls_->sensors.BrakeR0_ADC Yes, the brakes can be assigned through FSUIPC. Just make sure you do NOT use both the INI file, AND FSUIPC. Duplicat…
-
I am seeing a similar issue in my sim, regarding the FMS and HGS control panel, but only during dusk/evening flights. edit; The effect is more pronounced at dusk/evening flights. During the daytime the FMS, in my sim, is slightly blurred but stil…
-
The only suggestion I could give at the moment is to increase the brightness of the FMS display. It improves the visibility of the FMS without having to use the pop-out, or zoom the view point. Regards, Jax edit, Increase the brightness by pre…
-
Thank-You, Kroswynd, email has been sent. Regards, Jax
-
Check the user area here at the majestic webpage. You'll find it in there. Cheers, and happy flying.
-
Thanks, chaycebaylee4, this will add nicely to my Canadian Q400 fleet. Cheers, Craig
-
Have you tried adjusting the glareshield lighting knob on the overhead panel?
-
The issue may be with the navdata for GCXO, and not the Q400 FMS per se. Have you noticed this issue at other airports/runways? Majestic may have to consult with Navigraph to get this sorted. Just my .02c. Cheers, Jax.
-
Hi micstatic, At the top of the .JCC file it states which scan rate is being used. In your case it's 125hz. From JCC ; Created by MJC84 Joystick Config ( _ scanRate=1 ; 125Hz scan rate_ ) Cheers, Jax
-
Hi Lars, Those statements that you listed from the Q400 ini file are no longer showing in the latest (v1.024) Training edition update. I'm not sure what that means exactly, but it may hint towards Majestic not wanting customers to toy with it bef…
-
Hi larsottof, This has been discussed before, between myself and another user, trying to setup dual controls in the Pro version. Our results were the same as yours, only receiving 50% of the travel with the yoke. Both yokes needed to be moved simu…
-
Hey Reinhard, You're welcome. I happened to have "found" those in the documents included with the training version. (rev. 23.11.2021) Cheers, Jax
-
Hi Reinhard, I'm not a programmer, and unsure if this may be what you are looking for; // STBY INSTRUMENT airData_->stbyBarometricCorrectionRotaryDelta airData_->stbyBarometricCorrectionSTDPush airData_->STBY_QNH Cheers, Jax
-
Sorry Freddy I did miss your post. Is there a software for your joystick? Anything that may be locking the ability for assigning that button? I had an older logitech joystick software that did that for the trigger switch. It was a PITA to figure out.
-
You're welcome, Kroswynd. I am always happy to help, and I enjoy a good "puzzle". And yes I have made the same mistake many times.
-
Hi Freddy, Removing the semi-colon (;) from in front of this line will enable the AP disconnect. ;J2_b1=AFCS_->inputs.AP_disengage Do the same for the TCS line if you want to use that function as well.
-
Freddy I don't believe it's an "incorrect assignment" issue, as such. Your numbers match what the simulator is seeing, so something else is causing interference. Could you zip and post your ini file? I want to test it with my setup, if possible.
-
FSUIPC does give you the correct joystick and button numbers. IF using Windows (control Panel) you have to subtract 1 from the button number. You may want to check that you do not have a duplicate assignment for your controls. P3D will auto-assign f…
-
For a quick and easy way try this utility. viaintercity.com/forums/bombardier-dash-8-q400-(dhc-8-402q)/
-
I would say that Just Flight were wanting to avoid a repeat of the poo-storm that occurred during the Training edition release. Being first out of the gate with the new installers is a perfect way to show that it was a one time issue, and they do de…
-
@otreblA, Majestic has got you covered. See this thread on the forums. http://majesticsoftware.com/forums/discussion/94/attention-flight-sim-store-customers
-
New installers are usually found from the vendors where you bought the Q400.
-
Yep, I have noticed the same thing, which is why I always use the Q400 exits gauge. It has worked flawlessly since 2013. ps, And if Mr. Hodkinson happens to see this thread, "Thank-You".
-
Hi Louis, Using the FMS can be finicky, but it does work. A single click is all that is required. Try opening one door at a time, waiting till it is fully open, then click on the next door. The doors open slowly, and you do have to wait for the pr…
-
What you are experiencing is a normal operation for the Q400 MFD. It automatically increases the range from 5nm, to 20nm when the aircraft descends below a certain altitude,1000'AGL, I believe, during an approach. The actual AGL numbers, as well a…
-
I don't believe it's P3Dv5, as I have had similar incidents in P3Dv4.5. We'll just have to wait for Majestic to release the patch.
-
I did a test flight of your route, using the Q400 Training edition, and had the same crash as you have noted. I have had this issue with the Training edition before, (see kroswynd's link) but never with the Pro. I am wondering if the visual enhancem…
-
The only time I have seen this problem was while I was using a shader modifying software. Tomato Shade, to be specific. There are several others out there including the various sky texture/shader add-ons by REX and Hifi. You may want to begin your t…
-
@XinLv, Try emailing Majestic support again. It is important to include; * Write to our Support Department (support (at) majesticsoftware (dot) com). Be sure to include supporting credentials used for the purchase of your original Q400. a. O…
-
@ladbound, Yes, it does.