DCLAN
About
- Username
- DCLAN
- Joined
- Visits
- 87
- Last Active
- Roles
- Member
Comments
-
Hello to all, since today the problem is back :-(! It now also affects the “Luxair” variant. It's the paint schemes that I selected from the supplied paint schemes. Maybe someone can suggest what I should do?
-
Hello Reinhard, yes indeed I use FSUIPC, but I am not wäre, that I would have created different configurations. However it works again, and of course I am very happy about that. Cheers Ingo
-
Hi everybody, Solved! Choosed the "Luxair" livery instead of the "Wideroe". Problem gone😄! Weird somehow, but true! Cheers
-
Hello, thanks for your tips and advice 😃! Nevertheless, unfortunately for me, nothing changes the fact, that the machine is unusable in this form. It must have changed some data whereever independently that I can not influence. Believe me I kn…
-
Hello dear community, to my regret meanwhile the problem is back again since yesterday :-(!!! I have changed nothing, but also nothing at all at the settings ( neither in the flight simulator, nor within the Dash. Even a complete uninstall/reins…
-
Oh my,... Solution: In the basic settings of P3D indicate "TAS" was checked instead of "KIAS". Now everything works fine again :-)!!!!!
-
O.k. so here you finally are. Approach is from my last flight 23/07/17
-
Hi, Multimedia timer has been checked! Using the Pro Edition. How do i embed a video sequence here????
-
Wilco!
-
* Happens no matter AP is on or off. * negativ * negativ Have thousands and thousands of hours on that aircraft. Never had a problem with it.
-
Did a new 125hz Tool Run, meanwhile it works!
-
Thank God, yesterday we finally managed it after months of hard work. Problem was indeed the different ip4/ip6 configuration. My old man had his ip6 settings completely deleted via the Internet provider. These were explicit: The funct…
-
Hello, Meanwhile another year has passed. We tried many, many hours together to get into the shared cockpit - no chance. 1) I tried to establish a connection with another colleague. The result was the same as with "HaJo". We got only 1 str…
-
> @DCLAN said: > Hello, everybody, > > Maybe I am completely wrong here, but I have observed the following several times. > The Dash does not retract its landing gear when flying online on IVAO with P3D. > > Strang…
-
So there isn't an active engine rating "MCP" at all, but on engine 2 this rating was shown in my case.Figured out, that this probably has to read the normal "MCR" rating instead of "MCP" The message " Uptrim TRQ" itself seems to appear completely au…
-
Not exactly the point, but did someone whitnessed that occassionaly the FMC Fuel Page assumes the PAX weight to bei 11kg only. After reloading the aircraft it's the given weight again. This to me happened two times this week.
-
Let's be clear. On the same systems it has run before, even if it was already a few years ago and at that time still in FSX now in P3D v3 and P3D V4.5. We have unlocked the ports at every conceivable place (router, in the Windows firewall, in K…
-
Had the same issue. Tried everthing possible, without success. Guess, it's a somekind of Windows issue betweeen our two systems, which no one can help us anyway. Really a pitty.
-
Think you are right- thanks!
-
Optically i did see that. Meant it more in terms of weight gain and aerodynamics.
-
But may i ask,If that really has any effect at all whether you use it or not. Or questioned another way round, is icing realistically simulated in P3D?
-
Very nice, but as far as it is my concern, i do have to agree, that no matter how you trim/load the Dash it appear to be massivly tail then nose heavy.
-
No problem, wilco :-)
-
I'm the colleague in the shared cockpit.Strangely once in January of this year everyone went well. The only difference from my point of view is, that I switched to Windows10. Apart from that, we implemented everything extremely accurately that is n…
-
I've made several flights in the meantime. Everything went according to plan. Probably forgot to delete the discontinuity between Airport and Missed approach procedure. Also I never explicitly armed the missed approach on the Nav-Page of the FMC.
-
Roger,will check-thx.
-
I can only agree. Had the same issue several times.
-
And what does that mean to me? There is a direct to command and still no graphical reference on the MFD. Or does the missed approach procedure optically appear, when I activate the go around button on the throttle?