934999
About
- Username
- 934999
- Joined
- Visits
- 2,194
- Last Active
- Roles
- Member
Comments
-
If you happen to have access to an iPhone/iPad/Mac, you could simply use my little app: http://majesticsoftware.com/forums/discussion/865/majestic-dash-8-q400-takeoff-and-landing-speeds-calculator-for-ios#latest It’ll do what you’re wishing for…
-
@UAL277 If you happen to be talking about the iOS app I developed (DH8D TOLD), please do not hesitate to reach out, either here by PM or using the App-Support button in the AppStore, with your exact issues. I’ll be happy to help. Kind regards,…
-
SATOT and NOPOS are AT OR BELOW restrictions, whereas PIGNET is an AT OR ABOVE restriction. The horizontal line below or above the altitude is your cue.
-
Just double tap anywhere on the screen 😎
-
The app has just been updated. It is now possible to select the departure runway based on the entered ICAO code. Airport elevation and runway heading will be automatically populated, depending on airport entry and runway…
-
Thank you, Bruce, much appreciated
-
What caught me out once was the one-button-offset. So for instance button no. 3 in your windows control panel becomes button no. 2 in the ini file. See here: http://majesticsoftware.com/forums/discussion/comment/2131#Comment_2131
-
Glad it’s working
-
Maybe worth to try and un-pause the sim after sending data from the control panel to the sim
-
Thanks, this was it. It says right there in the documentation that it’s 0-based, but the practical implication (i. e. offset required) never occurred to me. Stupid me, everything’s fine now. Regards, Oliver
-
Hi all, Sorry to bump an old thread. This is the most recent one I could find doing a quick search. Today I tried to assign two buttons using the mjc84.ini file: [JOYSTICK_INTERFACE_ASSIGNMENTS] J0_b10=AFCS_->inputs.AP_disengage …
-
Glad I could help. Just looked up my recent update purchase for P3Dv4.4 and it was 1.020, so sounds good.
-
Not sure about your second question regarding the version, but for the first question make sure you select "Show all variations" in the "Select Aircraft" screen in FSX / NOT select "Show Only Favorites" in P3D, depending on which sim platform you're…
-
Hi and welcome, in fact, SimBrief will answer that question for you, if you click the question mark next to the Download button for the Q400 file: * Download this file into /SimObjects/Airplanes/mjc8q400/nav/routes. * Open the FMS,…
-
Good to hear you’re all set From your first post it wasn’t clear to me whether the tanks were full or empty or something in between, hence my recommendation. All the best, Oliver
-
@Scorpio said: While I understand your harsh reaction to this complaint I am afraid I have another problem with the cpanel: everything seems to work just fine here with one exception - setting the fuel amounts! Whatever I put int the fields…
-
Let us know should you have any further questions. Oliver
-
Rolf, your problem is manifold: * Pax weight differs between PFPX and the CPAN: PFPX assumes 110 kg per pax including baggage, whereas the CPAN figures are based on 120 kg including baggage (PFPX: 5,068 kg/46=110 kg; CPAN: (3,900 kg+1,618 kg…