chaycebaylee4
About
- Username
- chaycebaylee4
- Joined
- Visits
- 356
- Last Active
- Roles
- Member
Comments
-
Even on the most updated version now, 1.026a, still having the exact same issue with RF radius to fix leg capability on RNP approaches. Given that this problem started existing on version 1.025, could you make version 1.024 and its patches available…
-
Personally I rotate the NAV Source knob by scrolling with my mouse wheel and not clicking on it. But what you've done so far sounds like it should be working. Did you also click the APP button on the MCP to begin following the LOC and GS signals ass…
-
I can't speak for how they do it in any airline, but the way I've always done it is, get cleared to the FAF in LNAV mode, and then once I've hit the FAF, make sure I have the proper frequency tuned into the NAV radio, then I switch the NAV Source fr…
-
Every RNP worked perfectly fine for me pre-patch, so it must have something to do with how faf identification/anything that was changed about rnav rnp approaches in this newest update. I noticed the names of the approach labels have changed from 1.0…
-
@GAT01 said: @chaycebaylee4 said: Just now I tried the RNAV (RNP) Y RWY 35L into CYYC via SELEV, and the RF legs did the same thing. I do believe it has to do with where the FMS puts the "RNV Y 35L" waypoint in the FPL, …
-
Just now I tried the RNAV (RNP) Y RWY 35L into CYYC via SELEV, and the RF legs did the same thing. I do believe it has to do with where the FMS puts the "RNV Y 35L" waypoint in the FPL, as it deletes any RF leg after that spot in the FPL.
-
Here's me just now, trying to RNAV (RNP) Y RWY 30 into CYEG via OMENA. Interestingly, it actually programmed the RF Leg from SEDEN to LIDIR, but after LIDIR went direct to SEKOB, and didn't fly the RF Leg. I'm starting to think it may have something…
-
@Jax_in_BC said: Hi chacebaylee4, Could you post the route you were flying for both Edmonton and Calgary. I will give them a try and see if I get a similar result. Cheers, Jax. Hey, Actually, I took off from rwy 02, and wa…
-
I'm on P3D V5.3, TRAINING Edition of the Majestic Q400. Installed 1.025, plane runs. Installed 1.025a, plane does not run, gear is retracted, all displays blank and will not turn on. I noticed the 1.025a patch also says it only fixes the wrong fo…
-
@kroswynd said: Hello, UPDATED 05/15/2023 While running some final checks we omitted to add some last minute corrections to the patch, which have been updated and can be re-downloaded via the Majestic Software Support - User Area. …
-
Go into your P3D's settings, then Axis Assignments-->type "Spoiler axis" in the top right search bar-->"Spoiler axis"-->"New..."-->Move your joystick to the left/right, then "OK"
-
For anybody interested, here's a link to the livery: https://www.kiwiflightsim.com/dehavillandcanada
-
@kroswynd said: HI, Discussed in a previous topic: http://majesticsoftware.com/forums/discussion/comment/4942#Comment_4942 A few tips in the cold and Dark configuration when turning on the BATT MASTER a. the pilots will appear…
-
Looks like an awesome livery! If you don't get anybody else willing to make the livery for free on this forum, you can visit this site https://www.kiwiflightsim.com/ , and ask for the livery and they charge a small price to make it.
-
Hey, in case anyone is interested, here's a link for the PAL Airlines livery on the Dash 8 Q400 with the black tail, registration C-GYYR: https://www.kiwiflightsim.com/palairlines
-
@freddy said: It's just a pity that you had to go to all that work ... uninstalling and reinstalling ... to discover it was the video drivers. Still, without doing that work, you probably would have continued for ages ages looking fruitlessly at…
-
@Diogo said: I've noticed that when I switch the landing lights to ON it causes some stutters... is there any way to fix this? Its really sad... Im using v5.3 with Visual Extension Pack. Than you! What do you mean by stutters? Do th…
-
@kroswynd said: Is this happening at all airports? Have you attempted to un-install and re-install? Are you using any 3rd party light add-on? Keep us posted... Thanks! After a few days now of figuring this issu…
-
UPDATE: This video was taken at Pearson (CYYZ). I went to San Francisco (KSFO) and noticed the black squares don't appear over the lights there, BUT the lights still flicker a lot.
-
@MASTER_WARNING_PTR said: @noabergstrom Missing engine scripts??? Engine failures are designed ONLY for the TRAINING & COCKPIT Editions. If you are a PRO user then you have to build your own scripts as engine failure by design are…
-
@MASTER_WARNING_PTR said: We considered added them but elected not as thus is an option that some airlines have, and not used by many. Ah, I see. Perhaps an option to have them on in the CPAN menu in the future?
-
@MASTER_WARNING_PTR said: The freighter mod was created during the initial release of the Q400 back in 2013 and was provided for the freight flyers. Initially, there really was not much traction on this mod. So we elected to leave it as a user f…
-
@carl said: Hi, we try to download updates from Navigraph into the same folder where we installed Q400 in P3Dv5. But it will not install. Any trick to get the FMC updatet? Q400 is excellent in so many ways but this is really a problem. Check y…
-
@Whisper said: what did you think of this one ? the one and only https://dehavilland.com/en ... do you still have this available? looks great
-
@RemPa31 said: I made one, I can send you in private if you want could you also provide me with the link to it? I'd love to have the PAL Airlines livery
-
@awf said: @chaycebaylee4 said: @kroswynd said: Not being able to save anything to your .ini could be a permissions issue suggestion made in your previous post. http://majesticsoftware.com/forums/d…
-
@AFArm said: I just did some testing to get it to fail at an IAS speed. In theory you are supposed to use "#airData_->ADC[0].outputs.IAS" instead of "#fdeData_->GS" to get the IAS speed. After testing that out unfortunately it did not work.…
-
@AFArm said: I had this same problem. For me the issue was the scripts for the associated failures were missing for some reason. When you click the engine failure buttons, SYSPAN tries to load one of the four files:"N1EngineFailureBeforeVr.mgs, N…
-
@kroswynd said: Ok, that a makes sense. However I based my statement on your previous post thinking both issues maybe related. I was running the .ini in administrator the whole time and it wasn't working. I had to do what I said up there…
-
@kroswynd said: Hi, You seem to be experiencing a plethora of issues which could be related to permission issues. I would recommend that you un-install the Q400 and reinstall using Admin Rights by right clicking on the installer and selec…