kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,360
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
If you are using the utility you spoke of, I am not sure if that may be causing an issue. Having not used it before, although that is strange. Unable to comment on fsuipc as I have not need to use if for my Q400. Have you tried reaching out t…
-
You are welcome
-
That is the purpose of a forum. To discuss issues that may or may not exist with the aircraft or simulation platform. The product is not perfect by any means and there a few bugs which we are currently working on. But our of the box the aircr…
-
If you need to have the installations reinstated, then send an email to our Support Dept. With the following 4 items: 1 Full name 2 Email used for the purchase 3. Vendor from which purchased 4 Order number Also provide an explanation…
-
This has been a topic of discussion, we have been doing some testing on what we think should be a fix but there are some other issues that require addressing before we release a fix.
-
Thank you
-
When you installed the aircraft are you also installing the associated simconnect installer that is supplied as part of the installer? In your case images alone are very likely not going to be adequate to assist. Can you create a video to show…
-
Good to hear you are back on track...
-
Sure you can send your ini, at least you can try it as a standalone
-
I know of the tool but we do not offer support for the utility. Hopefully the developer can get you back on track. Cheers
-
Are you experience the same issue with HDR on? I am not running 4.5 but will check and see if I can replicate in 5.3. This would not necrssisaliy be considered a bug as the HGS still functions but P3D does have certain flaws that are not …
-
I performed several tests using the latest update from P3D including the HFs and had no issues using VS or IAS for climbs and or descents. My recommendation would be is to uninstall and reinstall the aircraft, and be sure to use Admin right to …
-
The only thing I can suggest is installing and reinstalling and be sure to use admin rights. Most reports of switching to win11 did require a reinstallation if the Dash was already installed. But yours seems a bit odd being a fresh install.
-
You should be able to configure your sound configuration through the simulator to suit your audio input devices, primarily for pushing audio via your man speakers. Depending on the type of sound system the sound config tool allows one to assign…
-
@LSmith123 Posts of this nature need to be discussed with MJC administrators for permission in order to advertise any product for purchase. It does seem like a worth while venture for those interested, but kindly ask/discuss with forum pers…
-
Unable to assist if using a thrid party tool, and I have never used it. For starters I would recommend: 1. Reaching out it the developer of the utility. 2. In terms of the Q400 rudder being fully deflected could be indicative of the wr…
-
This is possible with two sound cards and very possible if your headset is USB. It should be as simple as assigning you ATC software to your headset Cheers
-
I also recommend that you "never" provide your email address and order info in any communication. This should only be done when communicating directly with the Support department via email. Thank you
-
@burm Are you pointing the navigraph installer to your root folder where the Q400 is installed. Once this is done the navigraph installer will install the files to your NAV folder.. If you are unable to get this working one can always pe…
-
Unfortunately we do not have have control over the Simmarket store, but I would strongly recommend starting with Simmarket customer support in rectifying the issue. Regarding your Majestic account it is very likely active under your original em…
-
If you are using FSX SE then the CPAN operation should be straight forward. 1. Load the Q400 2. Open the CPAN 3. Choose the panel state of choice and or make any changes as required within the CPAN. 4. Once those changes are complete…
-
A possible solution has been found and is being tested as there are few other issues needing to be rectified after making those changes, it takes time
-
Oh in that case you are correct, misunderstood your first post. The visual package is a separate (optional) package for purchase which we released last year. For some reason I read it meaning that you had purchased the visual enhancement pack…
-
Hi, Have you contacted the vendor to discuss the issue? That would be the first place to start. Cheers
-
Unfortunately, I am unable to read the message after the VS. There should be anything preventing you from selecting IAS or VS as such. And I take it that if you choose IAS it does not change to the desired mode.
-
How are you attempting to loading the aircraft for this panel state? Is this being done via the control panel CPAN? There are specific instructions for doing so. Ahoose the panel state of choice then click apply. You then MUST reload the air…
-
Can't put out an update to some that is not broken. Can you elaborate more on your issue as the issue mentioned in this post has a fix which is mentioned and once a adjusted by the affected use it corrected the issue.
-
> @landylu said: > Hello, I´m a cockpit builder and I´d like to make a Q400 cockpit. Is it possible to obtain more information about the use of this tool:EXTENDED JOYSTICK COCKPIT HARDWARE INTERFACE. I´d like to know what parts of the cockpi…
-
Using the simulator under the following premise at a flight institution will require a different license as the Training standalone edition that is offered is for home use.
-
That could very well be a third party addon that could be the cause