Afterburner
About
- Username
- Afterburner
- Joined
- Visits
- 54
- Last Active
- Roles
- Member
Comments
-
Let's contact Microsoft about this issue and see how quickly, errr slowly they will address it
-
Hello, I also experienced problem 1 and 2. Of the 10+ flights I made with P3Dv4.5, around two times I also had the ailerons (and tiller on ground) stuck after initial loading, and calibrating the inputs, switching them on and off didn't help. I eith…
-
Thank you for your quick response! In that case, we will have to live with the issue. Are there links to the discussion about it in the past, or have they been lost after the server crash?
-
I am looking forward to your results. To make myself clear: It's not that there are problems if you run with HT off; If you installed the Q400 and ran it for the first time with HT off (and you continue running with HT off each consecutive time), yo…
-
I have played around with turning on and off HT, and I can definitely reproduce the issue each time I switch: When you install Q400 and run it for the first time with HT on, you must leave HT on for correct functionality. If you then turn HT off, th…
-
Hello, I have made a new finding regarding the flashing instruments problem on startup. Today, I have disabled hyperthreading on my 6-core CPU AMD Ryzen 3600X in BIOS for experimental purpose. When I loaded the airplane, the problem with flashing in…
-
Today, I wanted to do a flight with Dash 8 Q400 in P3Dv3, and the instruments were flashing and going wild after loading the aircraft. I have never had this before. Is there another Windows 10 update that is responsible for this? I solved the proble…
-
I had the same problem recently with P3D v3! I activated the timer, and it only ran at half the normal speed. Not only that, but the fuel flow was also half of what it should be according to the fuel flow indicator. Switching from Queue Timer to Mu…