Guenther

About

Username
Guenther
Joined
Visits
355
Last Active
Roles
Member

Comments

  • Sounds good, veeze, but I cant find an ARM Holding button. On the left side of this page is only "Inb/ Dir/Turn", in the middle a drawing of the Holding, on th right side "Direct Entry". More advice is welcome! Thanks in advance!
    in Holdings Comment by Guenther November 2018
  • Sorry but this doesnt help me as the Holding is not part of my Flightplan. My example: Approaching NZWK Rwy 27 I have to perform a Holding at IAF Regat. Regat is part of my flightplan but the FMS passes Regat and continues the approach to NZWK. How …
    in Holdings Comment by Guenther November 2018
  • I dont know whether its helpful: Start the FMS, run selftest and then on Page Init 1/1 you find "Standard/Extended NAV Database expires (Date)". So you know the date of the last update.
    in Navigraph data Comment by Guenther October 2018
  • Yes, you are right Igl3592 and cargO, I said it misunderstandable. Sorry. Guenther
    in Repost: Pilot waypoints can't be entered into the FPL (Navigraph issue) Comment by Guenther October 2018
  • As far as I see it, is the solution that if you load a new cycle from Navigraph, you must bring the FMs to the same cycle. When done, you should have no problems with inserting WPs. Guenther
    in Repost: Pilot waypoints can't be entered into the FPL (Navigraph issue) Comment by Guenther October 2018
  • Sorry but I must come back to this issue as I failed with an RNAV-Approach to NZWK. My procedure starts with to set QNH, the Localiser and then to Arm Approach. But on NZWK is no Localiser and therefore (?) I could not Arm App and It ended with an…
    in RNAV Approach Comment by Guenther October 2018
  • Thanks a lot for this information! I am just very busy approaching and departing NZWK in all weather conditions as in some months I will be there to visit my son. And yes, I found the respective charts (12-1 + 2) for RNAV on both runways 09 and 27. …
    in RNAV Approach Comment by Guenther October 2018
  • Great support and the recipe of bobsk8 works perfect. Thanks to everybody! Guenther
    in How to clear a Flightplan? Comment by Guenther October 2018
  • Hallo veeze, thanks a lot for your assistance, now I could also make 2 approaches with perfect landings. The steps I take are now Arm Appr = LNAV on PDF After passing DO36U = Altitude 4.500 Push VNAV = VNAV Path in PDF right corner After Gudeg c…
    in RNAV Approach Comment by Guenther September 2018