Guenther
About
- Username
- Guenther
- Joined
- Visits
- 355
- Last Active
- Roles
- Member
Comments
-
Thank you Kroswynd, it was my confusion and mistake, sorry. Regards Guenther
-
Thanks for your reactions. No I do no "cleanups" on my computer (or he does it automatically in the background). And if it happens I have only to sign in with my password. As I mentioned, no big issue, only a bit strange that it happens nearly ever…
-
Today I was again recognised to be a stranger despite "keep me signed in" is marked. How can I find and influence an expiration date? Guenther
-
Good news Kroswynd, the problem is solved! Someone suggested to cancel the Prepar3D.cfg and all reflexions dissapeared. And I am happy again! Cheers Guenther
-
Okey, I try it once more to insert a picture. Guenther
-
Thanks a lot Sir, thats what my problem solved. I didnt realise that there is the described relation between the active transponder mode and TAS. Thinking logical it should had been obvious. Thats what I am looking for with our great Dash, to unders…
-
Yes Sir, thats correct. On the MFD I see the indication "TCAS off" and as I mentioned the button "TCAS on/off" doesnt react. Its also curios: if TCAS is off, then in the Arcdu it shouldnt show Stby as this indication is then wrong. Guenther
-
Thank you sputnik for your very good explanation and also to Frank for additional information. Now its all very clear. Regards Guenther
-
Thanks for this hint, if this occurs next time, I will try this. Guenther
-
Well Folks, its a bit strange for me that TOP should only be for emergency cases or Go around. I use it if I depart from a short Airfield. I found in meantime 2 possibilities to activate MTOP: a) I push MTOP button and move PL forward immediately, …
-
Hi Kroswynd, just to inform you: I didnt succeed using your template. Even playing around with 0, 1, 2 as you mentioned brought the steering back to life. Now a collegue from my Flight Simulator Club (FSC) sent me a copy of his ini (without 125 Hz) …
-
My dictionary tells me that what I feel now is in english called "to be dumbfounded". Just a new experience. Part of lifelong learning? OK, lets forget it. hukken, jes I know this restriction and I have the Pro edition. And Kroswynd, thanks agai…
-
@snave said: 86? Time to give up simming? Take up Golf or Tiddlywinks. I want to be polite. Therefore no comment to snave. Kroswynd, I very much appreciate your input and I will try in a silent moment to get the problem solved. Thanks…
-
@snave said: 125hz is NOT a Majestic offering. It's a bit rich demanding support for it from Majestic! Fix it yourself - It's so simple a child of nine could do it, and hundreds have!!!! First of all I didnt know that this is not p…
-
Thanks to krosswynd and ckyliu for your explanations, now my workload in Approach has become a very little bit smaller! Guenther
-
but not autofeather (which is for takeoff only) Hi ckyliu, where can I find, that Autofeather is only used for TO? Up to now, I activated Autofeather also during Approach, as I think its then as important as on TO. Guenther
-
The world is so large and so small. I would lik to send you a personal message. Maile mir doch mal. Meine (verschlüsselte) Adresse ist Vorname u. Duerr als ein Wort durchgehend geschrieben, dann t Bindestrich online Punkt Ländercode. Gruß Guenther
-
Wow, you are extremely quick with your answer. At least you are in the same time-zone as me. I am living in Germany. I already tried the snipping tool, found it and am happy that I could learn anotzer little piece of the computer world. As I menti…
-
Hello FraPre, I just want to say you in brief that your example worked, thats great, thank you. The pictures have been very helpfulI. I will come back to details in a few days. By the way: how can I make such pictures and how can I add them to a Co…
-
Thanks FraPre, thats certainly the reason for my problems which you solved now. Thanks! Guenther
-
Also bei mir kommen die Durchsagen automatisch an den entsprechenden Stellen, z. B. beim Beginn von Descent. Habe aber noch nie darauf geachtet, welche bestimmte Maßnahme die Durchsagen auslöste. Auf jeden Fall drücke ich nirgends drauf. Aber ich we…
-
Hello JP, thank you very much, its really friendly to wish me only one broken leg! But which one? Never mind, its good to have this document in my collection, thank you very much. Regards, Guenther
-
Hi and thanks a lot for your comments and especially for this important document! But how to handle all this information? 423 pages! When being in a hospital with 2 broken legs, immobilised for 4 weeks, then it should be possible to learn all but th…
-
As far as I know you cant change this in the cockpit. I have Prepar 3D and when opening the page "Scenario" there is a part called "Time and Season". There I can insert what I want and it will be then automatically transferred to the clock. Does th…
-
Hello, I experienced 2 times the same and discovered finally that Options/Slew Mode was activated. No idea why. Maybe I hit something without knowing. After deactivating Slew Mode the Sound was back. Hope this hint helps.
-
@CMBAviator said: yeah, i think there is too solution in the meanwhile: Set a TO trim value outside the white band on the high side ( nose down) after 400ft, engage AP and use TCS for manual flying but the Aircraft will auto tri…
-
I can confirm your findings. Even if I fill in the weight and Balance Control Panel as suggested in the existing Tutorials our Baby jumpes up to 15° or more, so you need extra attention in the busy TO-phase to control everything before you can activ…
-
I found (no idea where) an interesting article about landing the Q 400 and try to attach this document for you.
-
Elevator trim is available, I have it on one lever of my Throttle Quadrant. But dont ask me how to install it, it was done by another Simmer. On the other hand its really difficult for me to use the trim. Should I adjust Pitch per Yoke or per Trim?
-
@bobsk8 said: I just fly it like a real plane, using my rudder pedals, and never touch the trim. Ok, you can do it. But how looks your slip/skid indicator? For start I set Ruder trim to 10 right, correct during climb, set to 5 right durin…