roadie04
About
- Username
- roadie04
- Joined
- Visits
- 199
- Last Active
- Roles
- Member
Comments
-
..and you must reload another livery first. Then the airplane you want. For example you load the "Austrian" plane, make the changes, reload in the sim the "Augsburg" livery the changes are made. Now you can load any livery with the new changes. So w…
-
I mean that is fully OK. The original FMC is limitated so why not this one. And 64 flight plans is enough. If necessary everone can make a Folder to store old flight plans. Don't worry about that. My opinion Cheers and stay healthy
-
I have tested this with my Austrian Dash 8 in C&D mode. Also patch b and GSX2 is installed. In the GSX menu 4 (request boarding) the package loader goes in position and the cargo door opens. After a while the crew bus come and the pax door o…
-
I dont know how about the ini file but I control the lights and most of the other swiches and buttons with the powerful freeware tool LINDA
-
@Wiregauge said: Hi, " I will try installing the 1. MJC84PRO_1.020a_x64 then 2. mjc8-q400-Pro-1_020bx64-patch-inst . I will let you know. " I ended up Uninstalling and reinstalling mjc8-400-Pro-1_020x64-inst MJC84PRO_1.020a_x…
-
maybe it helps: on the mfd display the hydraulic press on sys 3 circles from 34xx to 26xx again and again.
-
Doesn't help same issue
-
I have also problems. See my post 'Dash "hangs" when batt on'
-
No. I deleted all old plans. I also uninstalled the complete Dash8. Deleted the directory. Reinstalled ver 1.20 w/o update a and installed update b. Nothing. Now I found a "solution". I start with any Dash8. The Dash hangs. Now I load the Da…
-
Ok, works. I deleted all flightplans, made a new with simbrief, imported it and it works. Thank you
-
I does all as described. Run as admin, no virus, ver 1.20a installed. I found out this is a random failure. sometimes everything works until open flight plan.
-
yes. before the update everything works fine
-
2 questions: 1; do you have removed the gear pins (must be stowed behind the the copilot seat)? 2; do you have set the NW Steering switch on (left panel at the pilot seat)?
-
Problem solved. The only thing I doesn't make was a PC restart. After that, everything works fine. Weird, very weird. Anyway, thanks for your help
-
Yes, FSUIPC was checked. As I said, the Dash8 worked properly before. The only change was the FS2CREW-install
-
No. I taxi and lineup the runway with the steering tiller. Flaps, trim and condition lever proper set, control lock disengaged, power levers set. At the t/o there where no warning sound. due the flight the aileron dosen't work
-
...and be sure the landing gear locking pins are stowed in the bag