roadie04

Comments

• ..and you must reload another livery first. Then the airplane you want. For example you load the "Austrian" plane, make the changes, reload in the sim the "Augsburg" livery the changes are made. Now you can load any livery with the new changes. So w…

  in P3dv4 control panel not applying changes Comment by roadie04 May 2020
• I mean that is fully OK. The original FMC is limitated so why not this one. And 64 flight plans is enough. If necessary everone can make a Folder to store old flight plans. Don't worry about that. My opinion Cheers and stay healthy

  in Crash when loading a stored route having more than 64 stored routes Comment by roadie04 April 2020
• I have tested this with my Austrian Dash 8 in C&D mode. Also patch b and GSX2 is installed. In the GSX menu 4 (request boarding) the package loader goes in position and the cargo door opens. After a while the crew bus come and the pax door o…

  in GSX2 & Q400: DOORS stuck in opening and closing loop Comment by roadie04 April 2020
• I dont know how about the ini file but I control the lights and most of the other swiches and buttons with the powerful freeware tool LINDA

  in Turning on lights with joystick buttons Comment by roadie04 January 2020
• @Wiregauge said: Hi, " I will try installing the 1. MJC84PRO_1.020a_x64 then 2. mjc8-q400-Pro-1_020bx64-patch-inst . I will let you know. " I ended up Uninstalling and reinstalling mjc8-400-Pro-1_020x64-inst MJC84PRO_1.020a_x…

  in update Dash8 x64 PRO v.1.020b Comment by roadie04 January 2020
• maybe it helps: on the mfd display the hydraulic press on sys 3 circles from 34xx to 26xx again and again.

  in Dash "hangs" when batt on Comment by roadie04 January 2020
• Doesn't help same issue

  in Dash "hangs" when batt on Comment by roadie04 January 2020
• I have also problems. See my post 'Dash "hangs" when batt on'

  in update Dash8 x64 PRO v.1.020b Comment by roadie04 December 2019
• No. I deleted all old plans. I also uninstalled the complete Dash8. Deleted the directory. Reinstalled ver 1.20 w/o update a and installed update b. Nothing. Now I found a "solution". I start with any Dash8. The Dash hangs. Now I load the Da…

  in Dash "hangs" when batt on Comment by roadie04 December 2019
• Ok, works. I deleted all flightplans, made a new with simbrief, imported it and it works. Thank you

  in CTD after update when open flight plan Comment by roadie04 December 2019
• I does all as described. Run as admin, no virus, ver 1.20a installed. I found out this is a random failure. sometimes everything works until open flight plan.

  in Dash "hangs" when batt on Comment by roadie04 December 2019
• yes. before the update everything works fine

  in CTD after update when open flight plan Comment by roadie04 December 2019
• 2 questions: 1; do you have removed the gear pins (must be stowed behind the the copilot seat)? 2; do you have set the NW Steering switch on (left panel at the pilot seat)?

  in Nose wheel steering problem Comment by roadie04 November 2019
• Problem solved. The only thing I doesn't make was a PC restart. After that, everything works fine. Weird, very weird. Anyway, thanks for your help

  in Ailerons don't work Comment by roadie04 July 2019
• Yes, FSUIPC was checked. As I said, the Dash8 worked properly before. The only change was the FS2CREW-install

  in Ailerons don't work Comment by roadie04 July 2019
• No. I taxi and lineup the runway with the steering tiller. Flaps, trim and condition lever proper set, control lock disengaged, power levers set. At the t/o there where no warning sound. due the flight the aileron dosen't work

  in Ailerons don't work Comment by roadie04 July 2019
• ...and be sure the landing gear locking pins are stowed in the bag

  in How to silence the takeoff warning?? Comment by roadie04 January 2019