MASTER_WARNING_PTR
About
- Username
- MASTER_WARNING_PTR
- Joined
- Visits
- 126
- Last Active
- Roles
- Member, Moderator
Comments
-
The transfer of weights should work as always which pauses the simulator. However, regarding changing from kg to lbs and mercury to inches - there was a discussion piece offered by from @kroswynd in another post: P3D v5 introduced some issues wi…
-
They will load for cold and dark, as that is normally when the intake and pitot covers would be installed (shutting the aircraft down until the next days operation).
-
Agreed it is certainly some sceneries from Orbx (there may be others). If I recall when testing was done it was done specifically on a few to get the aircraft working such as PAKT. This will probably have to be listed as one of the additional fl…
-
Have you checked your speaker output to see if you are using 2.1 speakers vs 5.1. If your configuration is 2.1 and you have 5.1 set through your on-board or sound card configurator this could pose possible issues (@kroswynd, tipped me off on that …
-
Just saying that you are getting stutters without any substantiating information does not allow one to be of much help. If I recall this has not been one of the reported issues wit the Visual Extension. Is this happening every time you turn the li…
-
@noabergstrom JustFlight had the TRAINING Edition upon initial release which was a few months ago.
-
@noabergstrom Missing engine scripts??? Engine failures are designed ONLY for the TRAINING & COCKPIT Editions. If you are a PRO user then you have to build your own scripts as engine failure by design are not a part of the PRO Edition.
-
The project is certainly still alive and work continues daily. An update will be provided on the project(s) when is at a state worth discussing. There is a lot that needs to get accomplished
-
Discussed already: http://majesticsoftware.com/forums/discussion/1219/weird-glitch-using-the-visual-expansion/p1
-
With the latest version of visual extension already completed it is not likely for this development cycle.
-
We considered added them but elected not as thus is an option that some airlines have, and not used by many.
-
More than likely not unless our modeler makes changes to the original files.
-
The freighter mod was created during the initial release of the Q400 back in 2013 and was provided for the freight flyers. Initially, there really was not much traction on this mod. So we elected to leave it as a user file if any one wanted interes…
-
Very likely we at MJC will not be doing it, but hopefully a talented painter among the community will be willing.
-
Thanks for the heads up regarding the airports in use and lighting. This can be a challenge replicate as our results in the lab are to opposite. Which airports in particular have you experienced the issue so that we could attempt to replicate.
-
The tool is third party addon which we do not support but are glad that it has been able to assist many users in getting up and going. The implementation of the 125MHz functionality is done via the mjc84.ini, but glad to hear that you are good …
-
Hi @tonyc your issue does sound a bit bizarre. Not knowing how you have your flight controls configured it may be a bit challenging to attempt to trouble shoot with some additional details from you. Which version of the Q400 are you using?…
-
If you have the TRAINING EDITION it you can verify the version in the documentation. Regarding RNAV approaches there has been a discussion regarding this recently for which the developer has identified the issue and plans on pushing an update w…
-
This has been a topic of discussion as some folks complain they are too bright while other express that they seem to be very dim. Is your issue being experienced at both default and addon airports? Keep us posted.
-
Hello, Have a quick look at your CPAN for the "timer" and ensure that MULTIMEDIA is selected as the Queue timer has been having issues since a few Microsoft updates ago. Keep us posted.
-
We are aware of this issue and hope to have it addressed in a future update.
-
Hi, Resetting all failures should have corrected the issue. 1 In your attempt to reset the failure was this executed via the "RESET HYD QUANTITES" or "RESET ALL FAILURES" switches? (The latter should have correct the failure mode). 2 We…
-
Contact us via our support email as the installation appears to be normal. The Bambo livery should be visible. Have you looked in the Mjc8q400 folder to see if it the "texture.BBO" folder exists. The other items of the visual package that you m…
-
How do you have the tiller configured?
-
Not quite sure what is triggering your specific issue but the AFCS_FSX_SYNC=1 should not not cause such erratic behavior. It however is in place to allow users relying on default bindings which work well for the most part for those who do utilize i…
-
Hi, work is always being done just not as at fast a pace as we had hoped. With the Team being in various part of the world and various events that have loomed in recent times - family priorities have taken precedence. Work however is still on goin…
-
Showing a video clip of your event would be better suited as one is not able to tell if you are flying the aircraft correctly.
-
@seery234 said: I have just installed the Pro 1.021x64 version onto a new P3Dv4.5 install and i am having the same issues as described by the users before. I have tried all solutions but nothing seems to be working. Any help would be great…
-
Cold and Dark is a panel state which one can change via the CPAN Response from @kroswynd in another post: P3D v5 introduced some issues with the CPAN which we have requested that LM look into. Until that issue is addressed (hopefully) there i…
-
Very likely in the actual UNS-1 manual but at this time this feature is not available for the modeled version of the Q400