Yes, I see the few examples in the Special Features document. I'm guessing there are far more variables available htan just AP_disengage, TCS_button and axes.

I have been flying this plane for quite a few years. I installed Training version 24 into P5D recently but I am not able to get the .ini file to recognise any of my joystick buttons. I have 4 controll

J0_b2=AFCS_->inputs.TCS_button

same button assigned within P3D itself. The TCS test Kroswynd asked me to perform confirms that I can link that button successfully in the ini file ... so having it in the ini file and in P3D will i

Thanks, so the syntax is correct. Just out of curiosity. can you swap the AP disengage with the TCS and see if you get any response from the TCS when engaged in flight plz.

Thanks, so the syntax is correct. Just out of curiosity. can you swap the AP disengage with the TCS and see if you get any response from the TCS when engaged in flight plz.

Thanks, so the syntax is correct. Just out of curiosity. can you swap the AP disengage with the TCS and see if you get any response from the TCS when engaged in flight plz.

Do the same for the TCS line if you want to use that function as well.

J0_b2=AFCS_->inputs.TCS_button

@q400sim has indicated that your TCS (touch control steering) is active, and thus overrides the autopilot when activated for temporary flight adjustments. It is very possible that this is active in th

Lardinis, looking at the FMA (flight mode annunciators) at the top of the PFD, I see you have flight director modes selected but that TCS is enabled. TCS essentially bypasses the autopilot and allows

J0_b2=AFCS_->inputs.TCS_button

Found post that explains how to correct TCS, all ok now.

Hello, I have q400 for p3dv5, TCS is turned on? How do I turn off and how did it get turned on?

[JOYSTICK_INTERFACE_ASSIGNMENTS] ; See SpecialFeatures.pdf Joystick Connector section for description J0_X=FlightControls_->sensors.Aileron0_ADC J0_Y=FlightControls_->sensors.Elevator0_A

1 TCS - tactile control steering has been modeled on all versions of the aircraft and for all platforms, which can be enabled and disabled or key assignments changed - via the mjc84.ini. When engage

TCS Tactile Control Steering (on the yoke on the right with P3D, probably not simulated with FSX) with display in the PFD at the top left. Minimum height to switch on the AP (I mean 400 ft) control su

TCS not activated, no input on the control surfaces or the minimum height not yet reached.

Dash, e.g. no GA switch remains activated, TCS not activated, no input on the control surfaces or the minimum height not yet reached. Maybe next time take a picture.

Autopilot/Tactile Control Steering (TCS) Annunciations