Not having GPU in Cold & Dark

Comments

• kroswynd

  February 2021

  Hello,
  
  No there is not. But you can create a scenario of a cold and dark state without the GPU attached. Downside is you'll have to reposition the aircraft to your airport of choice since the scenario creation is based on a set environment.
• FraPre

  February 2021

  For me, the Dash loads 98% in C&D mode without a GPU already connected. In 2% and for no apparent reason for me, the GPU is already connected in C&D mode.
• PierreP3D

  February 2021

  Ok thanks
• aua668

  February 2021

  Hi,

  In the scriptLib directory of the Q400 you find the settings for the several scenarios. The File ccColdAndDark.mgs sets the parameters. You might try to set the variable #electricsData_->gpuRequested in the Electrics section to zero. I have not tested it, as I have set it to 1 for me. With this setting I always have a GPU connected, what I prefer.

  ;Electrics __________________________________________
  COPY #electricsData_->control.stbyBat 0
  COPY #electricsData_->control.auxBat 0
  COPY #electricsData_->control.mainBat 0
  COPY #electricsData_->control.batMaster 0
  COPY #electricsData_->control.dcExtPower 0
  COPY #electricsData_->control.mainBusTie 0
  COPY #electricsData_->control.dcGen1 0
  COPY #electricsData_->control.dcGen2 0
  COPY #electricsData_->control.acGen1 0
  COPY #electricsData_->control.acGen2 0
  COPY #electricsData_->control.acExtPower 0
  COPY #electricsData_->gpuRequested 0

  Rgds
  Reinhard