kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
Well we are not able to reproduce the issue here in our labs be it on either v4.5 HF3 and v5.1x. It's a bit difficult to chase a ghost, and I don't like pointing fingers at third party add-ons, but again not knowing what everyone else may be runni…
-
Have you calibrated your flight controls within the simulator platform, and also ensured that they are working alongside the CPAN when the aircraft is loaded?
-
How are you attempting to access this view?
-
http://majesticsoftware.com/forums/discussion/871/engine-display-popup-screen-is-blocked-off/p1
-
A response can take up to 24 hours, but it will be rectified. If you have not gotten a response by the end of the day send me a PM. Thanks
-
@q400sim said: I’ll echo some of the points above first and then add my own: Fix the SID/STAR runway transition issue. I have experienced this as well, coming out of LAS is a good example. Slightly different engine parameters …
-
The manuals do offer some useful information, take some time and have a browse though them. Cheers
-
@jodle said: Does P3D5 version released? On Justflight is only P3D4. http://www.majesticsoftware.com/forums/discussion/814/majestic-softwares-q400-is-now-prepar3d-v5-ready#latest
-
http://majesticsoftware.com/forums/discussion/925/control-panel-not-saving-settings#latest
-
The aircraft is working as it was designed to assuming that you are using the Ailerons for the tiller feature while taxiing. > What I see when I operate them is this: when i give it right aileron the right power lever goes up about an in…
-
Your issue is a protection one which has been discussed several times on the forum for which a search will give you multiple threads regarding the matter. In the mean time, uninstalling then reinstalling the Q400 as the administrator usually c…
-
@Jax_in_BC said: Most airplane lovers are aware that the dry operating mass varies from aircraft to aircraft, among the same type. My suggestion would be; having the possibility of having the DOM of an "individual" aircraft, being saved in an…
-
.
-
What is one of the primary criteria for landing on a short runway? Flaps 35 right? So you use FLAP 35. The procedures in place for a go-around with the use of flap 35 are not much different than that of flap 15. Now if your determinat…
-
Awesome....thank you JP for your input.
-
Yes Sir. Give that a shot, at the moment we suspect that it could be driven by a possible icing issue, but we could be off in that theory as well, but at least let's start here. Cheers
-
> @helico55 said: > So if I understand whatever strong wind or not whatever length of the runway you use flaps 15 most of the time. There have been several posts in this thread eluding to the fact that the use of flaps 15 or 35 is the p…
-
> @Lucbaverey said: > I have the same problem except my aircraft stops and the starts moving again and this happens during taxi and flight. > > I am running the Pro version of the Dash 8 in P3D 4.5 on Windows 10 version 1909. …
-
Thanks for the update. For the AP to be I operative the only suggestion I would have made initially.
-
Awesome news...thanks for the update
-
Thanks for the update. I would also like to pick your brain for a minute. * During the SIM session in question did you observe any visual icing on the aircraft? * The next time that the issue occurs where icing can be seen or may be possible …
-
Hello, Thanks for the update, and will take a look into this. I have seen at least one other report of this nature so we'll have to see what we can figure out. Are you able to recall the airport and weather so that we might be able to recall it…
-
This is the GENERAL RULE for landing the Q400 based on flap settings, and may differ based on an airlines SOP, not including times where flaps 35 will/may be necessary based on the runway length or other factors. Flap Setting for Landing. The ch…
-
I have been able to test on my end to verify that we did not have a hidden unidentified bug, but was unable to replicate your issue.
-
Thanks for the illustration of the issue. * Might you be using any third party utilities addons that may be interfering with the mouse functionality. If you are using any, could you attempt to run the Q400 by itself if see if you are able to r…
-
Dragging the condition levers is normal accomplished with the left mouse button unless you hace changed the functionality. Other right button functions have not have not exhibited and freezing of the aimz at least on my end and I am using the Win10…
-
Its not odd. Recent Win 10 updates have broken the Queue functionality, this was mentioned in a few threads, which requires switching to the Multimedia timer.
-
Only active sky is supported
-
No true glass on the Q400
-
Hello Haseen, Kindly take some time and check YouTube or google and see how to acquire information from your event viewer. This is information that is valuable and getting as much info on it is an asset in helping self trouble shoot issues. C…