kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,384
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
What are explaining as the cold and dark configuration does not seem correct. Are loading the cold and dark script via the control panel (CPAN)? In this configuration, the majority of the switches are in the off position. However you desire the …
-
Folks, We have had a few users in the past who experienced the same issues, and what we observed was that of the lighting effects used/selected via third party programs like REX's Texture Direct, etc. had an effect on the taxi lights not illumin…
-
We have not done any tests using ivao lately but we never issues with gear retraction similar to what you mention. Will have to have another look when time permits. Thanks for querying the issue. Cheers
-
Hello Hinshee, The 32bit version of the Q400 is version 1.020b which is in installer in your account. Cheers
-
When the control lock is engaged it prohibits the movement of the ailerons, and you are correct the yoke will not move once the control lock is engaged. However. if you are using the yoke for ground steering, it will still operate normally even …
-
Hello, Copy that you are having some issues. First, what version of the Q400 are you using? I can only assume that it is the 64bit version of the Q400, if it is not then your version will not work properly in many cases. if you are using the 6…
-
What may seem like a problem, is actually how the aircraft is designed to work as @zedlin mentioned. Cheers
-
Hello, The shortcut for the condition levers in FSX and or P3D are the same as the default FSX/P3D - CTRL+F1 - F4 (TBH, I have not used the keyboard logic for quite some time now, but we have not made any changes to its functionality). The MJC…
-
That is correct the pilot edition is not developed to utilize the xml interface. Owners of the pro edition are provided with a copy of the xml data.
-
Something we have given some thought too put have placed on the back burned for now. May revisit the option depending on time... Thanks for the reminder. Cheers
-
@tayibetom Hello, Have a look at the previous post, and see if this may apply to your situation. However, with the issue you are having this was a known bug hence the reason for the updated patch v1.020a (which you have advised is not in yo…
-
@jpgmultimodal The upcoming version of the Q400 will work with Win 7 without issues Cheers
-
Hello Sebastian, If I am understanding you correctly - upon installing the Q400 over your already installed Q400 resulted in your modified aircraft.cfg being over-written by the original aircraft.cfg that ships with the Q400. This would be corre…
-
The announcements can be executed via the FMS for the various phases of flight. However, the announcements script is driven by the engines being off and the passenger door being open...normally the "Boarding" cockpit state which can be assigned via…
-
@FlyFarther, While I am not able to give you a definitive answer on the vendor issues. I may suggest that you write to our support department including all of your credentials used for your pilot and pro purchases, and we'll try to work with you …
-
Some users will experience a protection issue with the Q400 after Win10 performs an Update. The only solution to remedy this issue is to un-install and re-install the Q400 (be sure to do so by using Administrator Rights by right clicking on the ins…
-
Hello, Have you attempted to contact Just Flight regarding this issue? If they are the vendor from whom you actually purchased (especially if it was for P3D v4.1) then there should be some record on file of your purchase. Keep us posted on th…
-
@CaptKornDog, Are you using the correct credentials whilst logging in. I'm simply asking as some users who may have upgraded from the pilot edition sometimes inadvertently use their old order number which may cause an issue depending on how the…
-
The pilot Ed will a patch specific to that edition as the pro will have its own specific patch... Both however are labeled 1.020a
-
@dehart Your current version 1.020b is correct and does not require an updated patch. The patch that is available for the Q400 relates to the 64bit versions of the PILOT64 or PRO64 Editions. Cheers
-
The repair will reset after reloading the sim. Or as a previous post suggested simply increase the rate of the sim to 8x for 3 min, and your failure will be repaired. Cheers
-
These are not allows features of the PRO Edition. The TRAINING Edition for cockpit builders will have the capability for builders to assign individual panels.
-
Thanks, yes its been a hot topic here for a bit, which has rightfully caused some frustration amongst our users, I'd be frustrated as well having to complete my flight at 140knots, or having to return to the field for a mx grounding item.
-
Hello Roberth7, welcome to the MJC forums, been a bit busy over the last few days and missed your post (my apologies). This has not been a common problem but have seen it reported once or twice on Facebook user groups, and each correcting solutio…
-
This has been a topic of discussion here on the forum, and we are still digging in the the cause of the issue as it is not an easy one to replicate (at least for us in the test lab). The suggestion was made by one of our users that saving the sit…
-
Will check into it...thanks for the heads up
-
Giving us a little more insight as to altitude being flown, which may further allow us to assist, or even video to show us how you are operating the aircraft. We have not pushed any changes since ver 1.020a. Cheers
-
Good to know, however the model from which we have developed our FMS does not have that feature, and it is very likely that we may not implement this. Thanks for the heads up this though, much appreciated.
-
The "Q" key will mute the sound of the Dash as well
-
Within the mjc84.ini one can disable the various aspects out the announcements/music if required. This can be done under the [SOUND] section changing the entertainment music enabled switch to 0 [SOUND] . . . . . . . . . ; passenger ent…