kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,384
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
* Re-download the file from the vendor from which you purchased. * Be sure to run the installer using Administrative Rights (right click on the installer and select the option - Run As Admin) Keep us posted
-
What application are you using for modifying the mjc84.ini? Something as simple as Notepad should allow one to change the parameters within the .ini file and save
-
@jpgmultimodal, Thanks for sharing the online documentation provided by the Bombardier website. This at the moment would be the only available source to allow for the required date by some users. @dlrk, Currently, we do not have access to a di…
-
Craig, Executing a crosswind takeoff will not be an issue as one does not use nose wheel steering to control the aircraft during the takeoff roll. Although you are using the "aileron+mouse" option the nose wheel steering will disengage when the …
-
This problem is usually indicative of the FSX platform when returning to the cockpit view from an external view. The flight deck "usually" reloads within a few seconds in most cases, but we have seen a few where the following reasons could be one o…
-
@ArJuna said: 1. I just bought and installed MJC8 Q400 PRO edition version 1.020 64 bit a few days ago. I have until now a perfectly reliable Prepar3D v4.3 installation with many add-ons which are v4 64bit compatible.. I've never had a CTD…
-
This has been a topic of discussion in the past which, if I recall, we opted to not include the steep approach option. Many of our decisions to not include options in the current model of the Q400 are primarily due to the face that the model which …
-
No bother... Just needed to ensure that we could get you back up and running... As I mentioned your issue was not a common one, but we have had a few irregular issues in the past which were corrected. Glad to hear you are back in the saddle.
-
> @monmar said: > I do not use fsuipc, I do with P3d. With all the other axes I have no problems. > Thanks OK since you are using the simulators own input device set up this should be a fairly straight forward setup. Normall…
-
@Floren Why would you say it is a forbidden question? If you are having an issue then state your case. Cheers
-
Thanks for the heads up, I suspected that you may have already installed Acceleration, as it is required for the Q400 to work.
-
Kindly have look at the Frequently Asked Questions section here on the Majestic Software website Cheers
-
There should be a Liat livery over at avsim there may even be a CAL and air caribee
-
Kindly respond to some of the previous questions asked.... This way we can move forward Thanks
-
Ok my apologies..... I meant the WB.ini Now check to see if the values change in the WB when you push the data to the Q400. You did advise that are running the CPAN as admin
-
Hi Dirk, Within the CPAN there should be a text file... Can you confirm that one is there?
-
Thanks for the heads up
-
As @Jax_in_BC mentioned the SIM by default is paused whenever data is sent from the CPAN to the Q400, and the aircraft will remain paused until the user unpauses the simulator. Now, what you are experiencing regarding the fuel value returning to t…
-
Hello Monmar, Kindly provide us with more information regarding how are attempting to configure your flight controls. * Are you using P3D, or are you using FSUIPC? After calibrating your controls via P3D. * Are you ensuring that the cali…
-
-
Hello Nemi, The flag represents the country in which I was born - Antigua, and it has an overlay of the national coat of arms. Flag Symbolism: The 7 point golden sun of the Antigua & Barbuda flag represents the dawn of a new era. The colo…
-
It is not an unreasonable request however, the data of which you ask is normally provided via a third party company in the real world as their job is primarily to provide aircradt performance data for any given airport... This data in some cases wit…
-
MJC has made comment regarding this.
-
So the CRJs if I am not mistaken, has a side rail for the passenger door that can be lowered for the positioning of jetways, but the Dash 8s do not have this capability, however the jetway canopy once aligned with the pax door has a small platform w…
-
The instructions posted in my first response are very specific to what is required for purchasing the upgrade for FSS customers.
-
Provided you have *purchased* the P3dv4 Q400 version....you will have to ensure that you installed it using admin rights.
-
http://majesticsoftware.com/forums/discussion/94/attention-flight-sim-store-customers#latest
-
Performed a test of the Pause @ TOD and it works as intended. are you able to reproduce this problem, and if so kindly provide steps in how you are able to replicate the problem. Thanks
-
This behavior is very common with the use of FSUIPC's Auto-save function. If you happen to have this enabled disabling it would resolve the situation.
-
1. Uninstall the Q400 from the programs Uninstaller. Then go to each respective simulator that you have the Q400 installed in and verify that the "mjc8q400" folder has been removed.... If it is not removed by the installation then simply delete it…