cridel

Comments

• Hi, I'm running the 32 bit version. Christian

  in Unable to download new version Comment by cridel March 2022
• Hi Freddy, I dont see anything for new version in the user area. Only the link for 1.020 and 1.020b patch. Thanks Christian

  in Unable to download new version Comment by cridel March 2022
• Hi Reinhard, Tanks for the info Christian

  in Go Flight MCP Pro Config Comment by cridel March 2021
• Hi, For FSUIPC, it is simply a matter of using the macro mouse function to configure the desired buttons and switches. Christian

  in Go Flight MCP Pro Config Comment by cridel March 2021
• Hi, I also use Goflight's MCP Pro with the Q400 and FSX. I only use FSUIPC for the configuration of all the buttons and switches of the MCP Pro including the buttons for heading, altitude, etc. Christian

  in Go Flight MCP Pro Config Comment by cridel March 2021
• Hi all, I have the same problem after Windows 10 updates but with the FSX version. The proposed solution seems to have worked well too. Thank you Christian

  in Dash8 slowed down in time Comment by cridel November 2020
• Hi Elsmoko, I am only using 2D panels and confirm that the latest UPDATE / PATCH fixes this problem. Bye Christian

  in APU Lights Comment by cridel November 2020
• Thanks, will try it. Christian

  in How to get announcements for a specific livery Q400 pro Comment by cridel July 2020
• Hi Rich, I do not know if I answer your question correctly but I have configured several buttons for joystick, throttle quadran Saitek as well as for GoFlight modules via FSUIPC. The TOGA function is one of them. Thank you Christian

  in Joystick buttons Comment by cridel July 2020
• Sorry....thank you vasilishal

  in How to get announcements for a specific livery Q400 pro Comment by cridel July 2020
• Hi Andrew, It works well with your procedure. However, the sound is weak for the recordings I made. I used the same parameters as the original sounds. Perhaps it is the volume of my microphone during recording that is low. I will redo tests with he…

  in How to get announcements for a specific livery Q400 pro Comment by cridel July 2020
• Tanks Sir, I'll try this ASAP Christian

  in How to get announcements for a specific livery Q400 pro Comment by cridel July 2020
• Hi Andrew, Actually I try to keep the power until the touchdown and it's true that it brakes a lot in the IDLE position. I will also try the Q400 config tool with my FSUIPC values, maybe I will have better results. Thank you Christian

  in Idle Throttles Comment by cridel July 2020
• Hi Roman, I also had a lot of trouble configuring my Saitek yoke. The best I could do was with FSUIPC. But impossible to configure the yoke for the IDLE position. I also have the landing warning just before the touchdown. Bye Christian

  in Idle Throttles Comment by cridel June 2020
• Hi Phill, I also had a lot of trouble configuring my Saitek yoke. The best I could do was with FSUIPC. But impossible to configure the yoke for the IDLE position. I also have the warning sound just before the touchdown. Bye Christian

  in DISC and Taxi Comment by cridel June 2020
• Hi Kroswynd, It is true that since that time I have found many answers to my questions. I quickly understood how throttles work with the use of the tiller. For my Saitek, I have good results with FSUIPC for the configuration of the joysticks. I …

  in Saitek hardware with Q400 and FSUIPC or not ??? Comment by cridel May 2020
• Hi Tomaz, Same problem as for the XFILL, the data is transferred to the co-pilot's FMS but the MFD does not display the flight plan. My thing, make a DTO of the first waypoint on the co-pilot's FMS and the flight plan will be displayed on the …

  in A few issues I have with Q400 Comment by cridel May 2020
• Hi Kroswynd, I decided to migrate to Windows 10 and re-install everything, the first flight seems without problem, take-off went more normally. I will try the settings you suggested to see if everything is going well. Thank you Christian

  in Nose wheel up too fast at t/o Comment by cridel April 2020
• Hi Kroswynd, 1- I can send a photo of CPAN but I tried the settings that you indicated in the post http://majesticsoftware.com/forums/discussion/comment/1588 2- The trim elevator is at the very beginning of the white zone so as not to hear the…

  in Nose wheel up too fast at t/o Comment by cridel April 2020
• Hi Kroswynd, Just to inform you of the project I had, here is the bitmap that I would have used to have all the pilot and co-pilot instruments on a single panel displayed on three 19 '' screens. What I notice is that there is only one gauge th…

  in 2D panels modifications on 3 screens Comment by cridel April 2020
• Thanks for answer.

  in 2D panels modifications on 3 screens Comment by cridel April 2020
• Hi Kroswynd, I understand the situation and it is clear that it would be at my own risk but is it possible or not with FSPS? Thank you Christian

  in 2D panels modifications on 3 screens Comment by cridel April 2020
• Hi JP, Could you provide me with your email by private message so that I can send you some pictures of my cockpit to see if it would be possible to adapt the panels of the Q400? thank you Christian

  in 2D panels undock on multi-monitor setup Comment by cridel January 2020
• Hi JP, Are there 2D panels on the pilot and co-pilot side? What are the problems with 2D panels? I use Wideview for the external view on another PC so I only need instruments on the main PC. Thank you Christian

  in 2D panels undock on multi-monitor setup Comment by cridel January 2020
• Hi JP, I would love to see photos of your configuration. I have a configuration with 8 screens including 5 screens (3 x 19 '') for the pilot, central and co-pilot side. 2 other screens for the overhead panel and the radios, FMS, Throttle. Can th…

  in 2D panels undock on multi-monitor setup Comment by cridel January 2020