kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
Awesome job - thanks for sharing.
-
Awesome job - thanks for sharing.
-
Awesome job - thanks for sharing.
-
Awesome....
-
Ok - copy on the routes, just making sure we are on the same page. I need you to verify something for me. * When you save a flight plan, open the "routes" folder which is located inside of the "NAV" folder of the "mjc8q400 root folder, and …
-
Failing to execute the full installation procedure will result in unexpected results Thanks for keeping us posted. Cheers
-
Kindly follow the instructions in the previous post using our SUPPORT department to acquire your order number. I have removed your credentials from the post. Cheers
-
Hello Tony, The Freighter model was somewhat of an afterthought project which we never really fully incorporated into the base model, primarily due to cargo variants at the time not being available or in sue as such when we released the Q400. Ma…
-
OK, thanks for the update. So my question is, do you have FSX still installed? And if so, might you have a copy of the Dash installed for FSX. Normally there should not be a conflict between the two. However, if you are running CPAN from a sho…
-
Hello, I would recommend for starters: * Check your online account from which you may have purchased the Q400. * If you by chance did purchase from The FlightSim Store which is no longer in business then kindly follow the instructions fro…
-
Do you have more than one copy of the Q400 installed, i.e. P3D v4.5 as well? Not easy to determine your issue as you have not really given us much to work with in terms of setup: OS, simulator(s), etc
-
If I recall iniBuilds will do the repaint for a small fee
-
Are you installing the aircraft using Admin Rights by left clicking on the installer and selecting Run As Administrator? Not sure what the error message is saying as it is not in English.
-
Good question, I can not answer it off the top as there could be an underlying issue as incorrect axis depending on the type of input device in use. It is unfortunate that not all devices have the same foot print when it comes to setting up the con…
-
* Saving a flight plan is executed via the MENU page under STORE FPL * When you make mention of routes, are you speaking of SAVED ROUTES or items such as airways, VORs, etc?
-
Just looking at your config it is not always easy to identify the issue. There could very well be a mis-numbering of the input device assignments, I would start by recommending that have the proper assignments and proper axii for each physical joys…
-
Good to hear you are back on track. Cheers
-
If you are using rudder pedals with toe brakes from looking at the image provided it would seem the you rudder device is J1, you would then need to determine the axii for the left and right toes brakes. If your brakes then begin to work in the rever…
-
Hi Peter, This is a first in the sense of your issue with the application of braking. Off the top we can't think of anything that would trigger such a response just by applying the brakes. * Have you attempted to operate the aircraft withou…
-
Congratulations to the PMDG team on their recent release. We'll get there eventually and will make any necessary announcements when we see fit to do so.
-
Well there are 2 types of reflections present on the model: Instruments, PFD/MFD/ED (which I suspect is what you are referring to), and the Cockpit. The aircraft model has not been updated since its original release as that was not a primary focus…
-
1 TCS - tactile control steering has been modeled on all versions of the aircraft and for all platforms, which can be enabled and disabled or key assignments changed - via the mjc84.ini. When engaged one will see TCS in the top right corner of the…
-
Hello, There is no recent patch from Majestic at this moment as we don't narmally have to put one out with each LM update. During our testing with 5.2 we have not encountered any fps issues unless testing out side of the norm. Are you…
-
Ah, that is a different addon and has no effect on the Q400. So we are back to square one at the moment. It may be best if you provide a video clip to show the issue that you are having. Thanks
-
I personally have never had it installed but it's a part of the Immersion utilities from Parallel 42 (chasePlane/Q400 immersion and a few other titles). Not sure if you use some of those utilities which I suspect has a manager to control them.
-
Sceneries normally do not have an effect on the Q400 unless sim settings are high and have an impact on fps in which this behavior can be exhibited. There recently have been some reports of the immersion manager causing some issues with the air…
-
Would you by chance be using autosave for fsuipc? This tend to create in some cases stutters and or odd behavioral tendencies in the Dash primarily due to the fact the Q400 merely uses the simulation platform as a scenery generator. If that is…
-
Have you pointed the Navigraph installer to the right folder, which the NAV folder located in the "mjc8q400" root folder?
-
Elevator trim has to be assigned via the buttons section for your input devices. By default I think the simulator assigns the page up and page down keys, but these can be changed to your liking, and you can also assign buttons to your input device …