kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,384
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
I personally have never had it installed but it's a part of the Immersion utilities from Parallel 42 (chasePlane/Q400 immersion and a few other titles). Not sure if you use some of those utilities which I suspect has a manager to control them.
-
Sceneries normally do not have an effect on the Q400 unless sim settings are high and have an impact on fps in which this behavior can be exhibited. There recently have been some reports of the immersion manager causing some issues with the air…
-
Would you by chance be using autosave for fsuipc? This tend to create in some cases stutters and or odd behavioral tendencies in the Dash primarily due to the fact the Q400 merely uses the simulation platform as a scenery generator. If that is…
-
Have you pointed the Navigraph installer to the right folder, which the NAV folder located in the "mjc8q400" root folder?
-
Elevator trim has to be assigned via the buttons section for your input devices. By default I think the simulator assigns the page up and page down keys, but these can be changed to your liking, and you can also assign buttons to your input device …
-
Upon further discussion we do not recall having any discussion with the developer of FSE. However, that unfortunely is not the only program that faces similar challenges. The only thing that I can suggest is that developers when notified on is…
-
Thank you for your query and interest in the MJC Q400, myself nor the developer have ever used/tested FS Economy, but I have seen a few discussions on other forums making mention of some issues such as fuel and OOOI time management when using the MJ…
-
@Kouki said: Apparently he has fallen silent again. Bear in mind that we do have lives and jobs outside of the forum, and there are times as in this case where this post was overlooked, our silence could simply mean the matter is being re…
-
You are correct in that it is externals only. Cheers
-
Show us what you are speaking of. The AP DISENGAGE has been modeled correctly unless I am missing what you are referring to. Autopilot/Tactile Control Steering (TCS) Annunciations The Autopilot symbol “AP”, located in the upper left corner of t…
-
One is always welcomed their opinions, it is free world which allows one to do so. Not quite sure where you come off saying our priorities have changed, as I have said from day one that the training/cockpit editions for P3D will be our prior…
-
> @drayton_k said: > Update, I tried a reinstall of the Dash 8 and can confirm that its working fine now in P3D V5.2 Copy
-
Should work without issue, but there may be some inconsistencies with elevation and scenery depending on what each person has installed.
-
@Eleuth said: Just for the record, I didn't say I'm telling the thoughts of Majestic. I shouldnt dare'! But I simply refered to the opinion of the developers at PMDG and Aerosoft in their forums. That said I love to have your plane i…
-
Yes - as it does with all releases.
-
The default ini assignments for the autopilot and TCS can sometimes cause binding issues depending on the controller on has. But you have found the issue. Bear in mind if you perform a reinstallation of the Q400 that you will have to make that adju…
-
> @Eleuth said: > > Things changed, at this moment big plane developers see FS2020 as the new standard where they can do what is not possipble in P3D. > > Love to hear how this devopment of the Q400 is moving further …
-
Thanks for the update, and good to hear that you are back on track Cheers
-
Thanks for the update. 1. Chase Plane being installed should not pose a problem to the proper functionality of the Q400 add-on. 2. The DirectX and Simconnect installations that come up during the installation process are a part of the a…
-
Hello Nikos, The patch is specifically to address an issue driven by the P3D v5.0 compatibility - so that would be the reason that you do not have a link to the patch in your User account being an FSX user. Kindly drop us a line at our Support…
-
1. The issue you speak of regarding your gauges is due to a protection issue primarily experienced if the installer is not executed as the Administrator. Uninstall the aircraft and then reinstall by right clicking on the installer and choose "Run A…
-
Your installation previdelges would be reinstated.
-
Why are you mind blown?????? It serves as a one of the protection measures against piracy. If your installations become exhausted then you need to contact support with your credentials and a detailed explanation as to why you have exceeded the …
-
It makes sense if you have not selected the "keep me signed in" box below your login credentials. We have not kicked out anybody. Nothing has changed.
-
@JohnKhan, OK I am able to appreciate that you are not pleased with some aspect or aspects of the results you are seeing in P3D v5, do bear in mind that the Q400 is an eight year old aircraft originally designed for FSX, and has held its own up th…
-
Appreciate your thoughts on this. The train is already rolling so a bit difficult to turn back now, we will see the project through and hope for the best. Let's see where the train ends up.....hopefully on the right track. All aboard Cheers
-
@Orville46 The enhancements will at this time be considered as an additional package, and will more than like have a charge associated with it. More details to follow when we are closer to completion. @CheesySimulations I sense that your cre…
-
> @Hamsammich said: > Seriously? Your answer to a typo is, "I meant to do it?" I mean, I didn't even mention that the phrase is "peek AT," not "Peak of." But, okay. The quality shines. As mentioned before, thank you!!
-
Usually a reinstall will correct the issue. Very possible a windows update may have corrupted your permissions. We are still looking into what causes this issue. Cheers