I have the x64 PRO version of the Dash8Q400 and I wanted to update to 1.020b. And there, disaster, by launching my P3Dv4.1 the plane does not work any more, the popups do not work, buttons remain immo

I've noticed all hydraulic quantities are pegged at 100% both at 0 and 3000psi, which is actually incorrect. Here are excerpts from AMM showing the correctly serviced systems at 0psi will be at 75% an

First I configured the INI file correctly. Then I checked, that the port for listening to UDP datagrams gets active via netstat. The port is shown in the list, when P3D is started and the Q400 is load

What key/joystick assignments should I be using for elevator trim control? I currently have the default P3D trim nose up/down assignments assigned to my joystick. Trim up works fine but trimming down

In the meantime, the integral patches for version 1.020b of the MJC8 Q400 PRO edition x32 and x64 are as follows

Hi,

On the tutorial I use to learn (it's for P3D), the SEL knob authorize to set V1 VR V2 VFRI and VCLMB.

So technically once you have been deiced there is a time limit for which the hold over time will expire, I am not quite sure whet the time limitation is before one would have to redeice. I think we m

Here is the report of my latest crash through AppCrashView. I've heard of a uiautomationcore.dll fix, but after trying it did not appear to work, suggestions?

Now, tomorrow or during this eek-end, I'll try a new fly, reading page by page, stair by stair, the tutorial. Yesterday, I was happy to start-up, taxi, take-off and fly 30 minutes. But unfortunately,

Aerosoft Airbus A320/A321

* Neither engine would start; I could get roughly 30 RPM on the props but the engines would not light off. This was with the engine intakes in the closed position.

Regarding the MJC Q400 there are not really many bugs. I fly this plane since she has been released with FSX and now with P3Dv4 and did not find any problem with the CPL. Just one thing to note is tha

Have you tried just entering the ZFW (23225kgs) and Total Fuel (2460kgs) in the Fuel page of the FMS? - Enter the ZFW and press ENTER and then Fuel Onboard and then ENTER. The FMS will then calculat

I've entered the good numbers 2466 and 1303

In the Weight & Balance section of the CPAN enter 2466 in T/O FUEL and 1303 in TRIP FUEL then press CALCULATE. You should now see numbers in the FINAL WEIGHT & BALANCE section and 3 d

3. I'll try it and I made without doubt, some mistakes

> 3. I apply strictly the tutorial, but I can't enter the Fuel On Board. I tried a lot of time and every time, the numbers disappear, so it's impossible to have gross weight.

3. I apply strictly the tutorial, but I can't enter the Fuel On Board. I tried a lot of time and every time, the numbers disappear, so it's impossible to have gross weight.

P3D V4.5, no fs2crew ever installed, MJQ400 PRO up to date. Last AIRAC installed since released and 10+ flights with it and without issue.